Silicone Rubber Parts Manufacturer in China

Silicone Custom Rubber Parts: Complete Guide to Material Properties, Manufacturing, and Applications (2026)

Silicone rubber stands apart from organic elastomers due to its unique silicon-oxygen backbone. This inorganic structure imparts exceptional temperature resistance, biocompatibility, and weatherability that make silicone the material of choice for medical devices, food processing equipment, aerospace components, and countless consumer products.

Whether you’re specifying silicone O-rings for a pharmaceutical filling line or designing custom gaskets for outdoor electronics enclosures, this guide covers everything you need to select the right silicone compound and source quality parts from China.

—

Table of Contents

1. What is Silicone Rubber?
2. Key Properties of Silicone
3. Types of Silicone Rubber
4. Silicone Material Grades
5. Chemical Resistance
6. Common Applications
7. Temperature and Hardness Options
8. Silicone vs. Other Elastomers
9. Manufacturing Processes
10. Food-Grade and Medical Compliance
11. How to Select a Supplier
12. Pricing and MOQ
13. FAQ
14. Conclusion

—

Key Takeaways (TL;DR)

• Silicone rubber spans HCR, LSR, RTV, and FVMQ (fluorosilicone), each tuned to process and duty.
• LSR suits high-volume, tight-tolerance, flash-free injection parts; HCR for compression/extrusion; RTV for room-temp cure.
• Temperature range is roughly −60 to +230°C (FVMQ adds fuel/oil resistance).
• Grades: general-purpose, food (FDA/LFGB), medical (ISO 10993 / USP VI), and high-strength.
• Choose a manufacturer on clean process, mold capability, and documented grade certifications.

What is Silicone Rubber?

Silicone rubber is a synthetic elastomer composed of silicon (a metalloid element) combined with oxygen, carbon, and hydrogen. Unlike organic rubber compounds derived from petroleum, silicone’s inorganic silicon-oxygen backbone (Si-O-Si) provides unique properties that organic rubbers cannot match.

Chemical Structure

The silicone polymer chain consists of:
– Silicon-oxygen bonds (Si-O): Provide thermal stability and flexibility
– Methyl groups (CH₃): Give silicone its hydrophobic character

– ✅ Excellent biocompatibility (ideal for medical and food contact)
– ✅ Non-reactive and hypoallergenic

• ✅ Outstanding weather and UV resistance
• – ✅ Outstanding weather and UV resistance
  –

– ✅ Soft durometer options available (20-30 Shore A for gels)

– ❌ Lower tear strength compared to organic rubbers
– ❌ Higher gas permeability than some elastomers
– ❌ Moderate abrasion resistance
– ❌ Higher cost than NBR or EPDM
– ❌ Limited chemical resistance to acids and bases

—

Types of Silicone Rubber

HCR (High Consistency Rubber)

Also known as ” gum stock” or “solid silicone,” HCR is the traditional silicone rubber requiring vulcanization (curing) at elevated temperatures.

Characteristics:
– Two-part platinum-catalyzed or peroxide-cured systems
– Available in extruded profiles, molded parts, calendared sheets
– Typical hardness: 30-90 Shore A
– Good mechanical properties

Applications:
– Extruded seals and gaskets
– Custom molded parts
– Sheet gaskets and diaphragms

LSR (Liquid Silicone Rubber)

LSR is a two-component platinum-catalyzed system that remains liquid at room temperature, enabling high-speed injection molding.

Characteristics:
– Extremely pure and consistent

• Rapid cure times (seconds to minutes)
• – Rapid cure times (seconds to minutes)
  –

• Excellent for high-volume production
• – Excellent for high-volume production
  –

• Medical devices and components
• – Medical devices and components
  –

– Pharmaceutical closures
– High-precision electronic components

Advantages of LSR:
– Very low flash and waste
– Excellent reproducibility
– Ideal for cleanroom manufacturing
– Cost-effective at high volumes

RTV (Room Temperature Vulcanizing)

RTV silicone cures at room temperature without requiring heat press.

One-Part RTV:
– Moisture-cure systems (acetoxy, neutral cure)
– Skin formation in 5-30 minutes
– Full cure in 24-72 hours

Two-Part RTV:
– Platinum-catalyzed or tin-catalyzed
– Mix and pour systems
– Adjustable pot life and cure time

Applications:
– Prototyping and low-volume production

• Sealants and adhesives
• – Sealants and adhesives
  –

– Potting and encapsulation

FVMQ (Fluorosilicone)

Fluorosilicone combines silicone’s temperature resistance with improved fuel and oil resistance.

Characteristics:

• 40-60% fluorine content
• – 40-60% fluorine content
  –

– Improved oil and fuel resistance vs. standard silicone
– More expensive than standard silicone

Applications:
– Aerospace fuel system seals
– Automotive fuel handling

– Applications: Seals, gaskets, general-purpose molding

– Special compounds: Enhanced thermal stability
– Applications: Oven seals, high-temp processing

– Special compounds: Flexible at cryogenic temperatures
– Applications: Aerospace, cryogenic equipment

– Enhanced tear resistance
– Applications: Extrusions, shapes requiring durability

– UL-rated compounds available
– Applications: Wire insulation, cable jackets

– Volume resistivity: 1-100 ohm-cm

• Applications: EMI shielding, static discharge
• – Applications: EMI shielding, static discharge
  –
• – Applications: EMI shielding, static discharge
  – Cost: $$$$

  Electrically Insulating Silicone

  –

– Applications: High-voltage insulation

– Steam (up to 250°F / 121°C)
– Animal and vegetable oils
– Ozone and weathering
– dilute acids and alkalis

• Silicone oils and greases
• – Silicone oils and greases
  –
• – Silicone oils and greases
  • Many solvents (alcohol, glycols)

    Limited/Poor Resistance ✗

    –

• – Many solvents (alcohol, glycols)

  Limited/Poor Resistance ✗

  –

–

– Chlorinated solvents
– Ketones (MEK, acetone)
– Concentrated acids

– IV catheter access ports

• Reservoir diaphragms
• – Reservoir diaphragms
  –

– Implantable device components (with special biocompatibility)

• Peristaltic pump tubing
• – Peristaltic pump tubing
  –

– **Bakery and confectionery molds

• Dairy processing seals
• – Dairy processing seals
  –

–

– Sensor housings
– **Lighting seals

– LED lighting seals
– Printed circuit board coatings

– Fluid system seals
– Thermal insulation
– Vibration dampening

Consumer Products

– Kitchenware (spatulas, seals)
– Baby products (nipples, soothers)
– Watch bands and wearables
– Sport equipment grips

—

Temperature and Hardness Options

Maximum Service Temperature

Minimum Service Temperature

Hardness (Durometer) Options

—

Silicone vs. Other Elastomers

Best choice for:
– Extreme low-temperature applications → Silicone

• High-temperature oil exposure → FKM
• – High-temperature oil exposure → FKM
  –

• Food/medical contact → Silicone
• – Food/medical contact → Silicone
  –
• – Food/medical contact → Silicone
  – Cost-effective oil resistance → NBR—Manufacturing ProcessesInjection Molding (LSR)–

– Tolerance: ±0.003″ to ±0.010″

• Tooling Cost: $10,000-$100,000
• – Tooling Cost: $10,000-$100,000
  –

– Cycle Time: 10-60 seconds

–

– Tooling Cost: $500-$10,000
– Per-part Cost: Moderate

– Tolerance: ±0.005″ to ±0.015″
– Tooling Cost: $2,000-$20,000

• Per-part Cost: Moderate
• – Per-part Cost: Moderate
  –
• – Per-part Cost: Moderate
  – Typical MOQ: 500-5,000 piecesExtrusion–

• Tolerance: ±0.010″ to ±0.030″
• Tooling Cost: $1,000-$15,000
• Per-part Cost: Low
• • Tolerance: ±0.010″ to ±0.030″
  • Tooling Cost: $1,000-$15,000
  • • Tolerance: ±0.010″ to ±0.030″
    • – Tolerance: ±0.010″ to ±0.030″
      –

    –

  –

• • Tolerance: ±0.010″ to ±0.030″
  • – Tolerance: ±0.010″ to ±0.030″
    –

  – Per-part Cost: Low

  • Typical MOQ: 500-5,000 metersCalendering–
• • Typical MOQ: 500-5,000 metersCalendering–
• Width: Up to 60″
• – Typical MOQ: 500-5,000 metersCalendering–

–

– Width: Up to 60″
–

–

• Width: Up to 60″
• – Width: Up to 60″
  –

• Specific extraction testing required
• Common for food-processing seals
• • Specific extraction testing required
  • – Specific extraction testing required
    –

  –

• – Specific extraction testing required
  – Common for food-processing seals
  • Typical color: Translucent or specific food-grade colorsFDA 21 CFR 177.1550 –
• For direct food contact
• • Typical color: Translucent or specific food-grade colorsFDA 21 CFR 177.1550 –
• For direct food contact
• – Typical color: Translucent or specific food-grade colorsFDA 21 CFR 177.1550 –

– For direct food contact

–

–

–

–

–

– For direct food contact
– Extraction testing with food simulantsMedical ComplianceUSP Class VI –

– Class VI-A: In Vivo implantation test (subcutaneous)
– Class VI-B: Intracutaneous test
– Class VI-C: Systemic injection testISO 10993 – Biocompatibility testing:
– Cytotoxicity testing
– Sensitization testing
– Irritation testing
– Implantation testing3-A Sanitary Standards– 3-A Sanitary Standard 18-03:蠕虫蠕动泵用弹性体组件
– Compliance for dairy and food processing—How to Select a SupplierWhen sourcing silicone parts from China:1. Compound Verification– Request compound data sheets
– Verify FDA or USP compliance with certificates
– Conduct incoming inspection and testing2. Manufacturing Capabilities– LSR injection molding for medical/food grade
– Cleanroom facilities for medical
– Compression and transfer molding for custom parts
– Extrusion for profiles3. Quality Certifications– ISO 9001:2015 minimum
– ISO 13485 for medical devices
– GMP (Good Manufacturing Practice)
– FDA registration for food/medical4. Testing Capabilities– Physical property testing
– FDA extraction testing (if required)
–

– Dimensional inspection reports5. Sample and Prototyping– Sample availability for validation
– Rapid prototyping for new designs
– Technical support for DFM (Design for Manufacturability)Red Flags ⚠️– Unable to provide FDA/USP documentation
– No sample policy
– Very low prices (may indicate non-compliant materials)
– Limited communication
– No quality certifications—Pricing and MOQPrice Factors1. Compound type (standard vs. special)
2. Compliance requirements (FDA, USP Class VI)
3. Order volume
4. **Part complexity and tolerance
5. Tooling requirementsTypical Pricing (USD per piece)

Note: Food-grade and medical-grade compounds command premium pricing.MOQ Expectations– Standard O-rings: 100-1,000 pieces
– Custom LSR molding: 5,000-25,000 pieces
– Custom compression molding: 200-1,000 pieces
– Extruded profiles: 500-2,000 meters—FAQQ: Can silicone be used in steam applications?A: Yes, but with limitations:
– Standard silicone: Up to 250°F (121°C) steam
– Special steam-resistant grades: Up to 350°F (177°C)
– For higher temperatures, consider PTFE or graphite-filled siliconeQ: What’s the shelf life of silicone parts?A: Silicone has excellent aging resistance:
– Typical shelf life: 10-20+ years
– Storage: Cool, dry, away from ozone and chemicals
– No significant hardening or cracking with proper storageQ: Is silicone hypoallergenic?A: Yes, silicone is:
– Non-reactive with body tissues
– Hypoallergenic (rarely causes allergic reactions)
– Widely used in medical and baby care products
– Odorless and tastelessQ: Can silicone withstand robot vacuum conditions?A: For robotic applications, consider:
– Silicone gaskets with metal inserts
– Custom molded parts with enhanced tear strength
– Silicone-rolls for continuous operation
– Our team can recommend compounds for specific robotic environmentsQ: What’s the difference between LSR and HCR silicone?A: Key differences:

FlashMinimalRequires finishing

Q: Can silicone be colored?

A: Yes:
– Standard colors: Translucent, red, black, white
– Custom colors: Available with pigment additives
– FDA colors: Specific colorants approved for food contact

—

Conclusion

Silicone rubber’s unique properties—inertness, extreme temperature range, biocompatibility, and weather resistance—make it the material of choice for demanding sealing applications in medical, pharmaceutical, food processing, aerospace, and consumer products.

When sourcing silicone parts from China, partner with suppliers who offer:
– Validated compound compliance (FDA, USP Class VI, ISO 10993)
– Cleanroom manufacturing for medical-grade parts
– Quality certifications (ISO 9001, ISO 13485)
– Technical support for material selection and DFM

Need custom silicone parts from a reliable China manufacturer?

? Request a Quote →
Our team specializes in LSR injection molding and custom silicone components for medical, food, and industrial applications. Response within 24 hours with DFM feedback.

—

Related Guides:
– The Complete Guide to Custom Rubber Gaskets – Material selection and manufacturing overview
– FKM/Viton rubber guide – High-temperature chemical-resistant seals
– NBR Rubber: Oil-Resistant Solutions – Cost-effective oil-resistant seals

—

This guide is for informational purposes. Consult with our engineering team for application-specific recommendations.

Real-World Example

A food-equipment maker sourcing generic “silicone” got parts that fogged and cracked under SIP steam. Moving to a documented food-grade (FDA/LFGB) HCR from a supplier with a real material datasheet removed the failures. The grade certificate, not the word silicone, was the difference.

Standards & Further Reading

Silicone nomenclature is ASTM D1418 (VMQ/FVMQ) and ISO 1629:2013. Food and medical grades reference FDA 21 CFR 177.2600, ISO 10993, and the ISO 13485 quality system.