PRODUCT GUIDE

Rubber Gaskets & Washers: Custom-Sealed for Every Environment

Custom rubber gaskets and washers seal the joint between two surfaces to stop leaks of fluid, gas, or dust. At Anlintech we manufacture sheet, spiral-wound, ring, and fully custom-molded gaskets in FKM/Viton, EPDM, NBR, silicone, and neoprene—engineered to your flange, ID/OD, and pressure specification. Read our complete guide to custom rubber gaskets for the full material and manufacturing breakdown.

Types of Rubber Gaskets

  • Sheet gaskets – cut from elastomer sheet; economical for flat-face flanges and low-pressure service.
  • Spiral-wound gaskets – metal-reinforced for high-pressure, high-temperature piping.
  • Ring gaskets – o-ring-style cross-sections for groove-seated sealing.
  • Custom molded gaskets – complex 2D/3D profiles molded to drawing for unique geometries.

Material Selection Guide

MaterialBest ForTemp Range
NBR (Buna-N)Oil, fuel, hydraulic fluid-40°C to +120°C
EPDMSteam, weather, ozone-50°C to +150°C
SiliconeFood, medical, high temp-60°C to +230°C
FKM / Viton®Chemicals, fuel, heat-20°C to +205°C
NeopreneWeather, flame, moderate oil-40°C to +120°C

Standards such as ASTM and ISO define gasket material and dimensional tolerances we hold to.

How to Choose the Right Gasket

  1. Identify the media (chemical, oil, steam, potable water).
  2. Define the temperature and pressure envelope.
  3. Pick a compound from the table above.
  4. Specify geometry: ID/OD, thickness, groove or flat face.
  5. Confirm compliance (FDA, 3-A, NACE) if regulated.

Compare materials in our NBR vs FKM vs EPDM vs Silicone and FKM vs Viton vs FPM guides.

Applications by Industry

  • Automotive – coolant, exhaust, and sensor gaskets.
  • Oil & gas – NACE-compliant seals for sour service.
  • Food & beverage – FDA/3-A sanitary gaskets.
  • Electronics – IP67/IP68 waterproof gaskets.

Our Gasket Manufacturing

We compression- and injection-mold gaskets, and can die-cut sheet stock for prototypes. See the gaskets pillar guide for tolerances, process detail and a silicone vs rubber material comparison.

Frequently Asked Questions

What is the difference between a gasket and a washer?

A gasket seals against leakage between joined surfaces; a washer is typically a flat spacer that distributes load or prevents loosening. Rubber washers also provide light sealing.

Which rubber is best for high-temperature gaskets?

FKM/Viton® serves up to ~205°C; silicone up to ~230°C for dry heat. Choose based on chemical exposure as well as temperature.

Can you make gaskets to my drawing?

Yes. Send a 2D drawing or sample and we mold or cut to your exact ID/OD, thickness, and durometer.

Do you supply food-grade gaskets?

Yes—silicone and EPDM grades meet FDA and 3-A requirements for food and beverage lines.

Get a Quote

Send your drawing or sample and we will return a quote with lead time. Request a gasket quote → or see our FAQ. Back to custom rubber parts.

Related Resources

Related Long-Tail Guides

Contact Us
Contact Us

    *Name
    *Email
    *Tel
    *Message
    *Verify Code